Universal Measuring Antenna

Place of Origin: China

Universal Measuring Antenna is a four-system full-band antenna covering BDS, GPS, GLONASS, and GALILIE. The antenna adopts a multi-feed design, is equipped with an anti-multipath choke plate, and uses a waterproof and UV-proof cover. The specific phase center is stable, positioning accuracy is high, and low elevation angle signal reception is good. Has passed the US NGS certification test.

  • Features
  • Parameters

1. The multi-feed point design scheme is adopted to realize the coincidence of the phase center and the geometric center and minimize the influence of the antenna on the measurement error

2. The antenna unit has high gain and beam width in the pattern to ensure the technical effect of low-elevation signals, and it can still receive the satellites normally in some severely obstructed occasions

3. Equipped with anti-multipath choke plate to limit the influence of multipath on measurement accuracy

4. Waterproof and UV-proof outer cover, which provides protection for the antenna to work in the field for a long time


Antenna characteristics  

Frequency Range

GPS L1/L2/L5

BDS B1/B2/B3

GLONASS L1/L2

GALILEO E1/E5a/E5b

L-Band

Resistance   resistance 50 ohm

Polarization method Right-hand circular polarization

Antenna axis ratio ≤3dB

Horizontal coverage angle 360°

Output standing wave ≤2.0

Maximum gain 5.5dBi

Phase center error ±2mm

Low noise amplifier index  

Gain 40 ±2dB

Noise figure ≤2dB

Output standing wave ≤2.0

In-band flatness ±2dB

Working voltage 3.3~12VDC

Working current ≤45mA

Differential transmission delay ≤5ns

Structural characteristics  

Antenna size φ173*63mm

Connector form TNC female

Weight ≤450g

Installation method Refer to installation instructions

working environment  

Working temperature -40℃~+85℃

Storage temperature -55℃~+85℃

Humidity 95% non-condensing