Product
GPS500 Small Measurement Antenna
Place of Origin: ChinaHigh-precision antenna adopts a multi-feed point design scheme with high phase center stability. It can receive GPS, GLONASS, BDS, GALILEO satellite signals of the four GNSS systems, and support L-Band satellite-based differential signals. The antenna structure adopts double waterproof and UV-proof shell design. The product has passed the authoritative test of NGS in the United States. It is now widely used in intelligent driving, surveying and mapping, driving test and driving training, precision agriculture, digital mechanical operation and other fields.
- Features
- Parameters
- Application
1. The antenna part adopts a multi-feed point design scheme to realize the coincidence of the phase center and the geometric center, and minimize the influence of the antenna on the measurement error
2. The antenna unit has high gain and beam width in the pattern to ensure the reception of low-elevation signals, and it can still receive satellites normally in some severely obstructed occasions
3. With anti-multipath choke plate, effectively reduce the impact of multipath on measurement accuracy
4. Waterproof and UV-proof outer cover, which provides protection for the antenna to work in the field for a long time
Antenna characteristics
Frequency Range
GPS L1/L2/L5
BDS B1/B2/B3
GLONASS L1/L2
GALILEO E1/E5a/E5b
L-Band
Resistance resistance 50 ohm
Polarization method Right-hand circular polarization
Antenna axis ratio ≤3dB
Horizontal coverage angle 360°
Output standing wave ≤2.0
Maximum gain 5.5dBi
Phase center error ±2mm
Low noise amplifier index
Gain 40 ±2dB
Noise figure ≤2dB
Output standing wave ≤2.0
In-band flatness ±2dB
Working voltage 3.3~12VDC
Working current ≤45mA
Differential transmission delay ≤5ns
Structural characteristics
Antenna size φ152*63mm
Connector form TNC female
Weight ≤450g
Installation method Refer to installation instructions
working environment
Working temperature -40℃~+85℃
Storage temperature -55℃~+85℃
Humidity 95% non-condensing
It is now widely used in intelligent driving, surveying and mapping, driving test and driving training, precision agriculture, digital mechanical operation and other fields.